Strataline
(416) 471-5999

Commercial entrances · Vaughan, Toronto & the GTA

Commercial
aluminum
doors.

Choose a new aluminum door or improve the one you have. Glass, handles, automatic opening, access upgrades and repairs — measured, supplied and installed by Strataline.

Exterior commercial aluminum entrance preview: two door leaves, narrow stiles, black aluminum, sidelights on both sides, a glazed transom above, clear glass, brushed stainless vertical pull handles, surface door closers; thermally broken system requested, tempered glass requested, insulated glazing requested, paired doors with outer hinges; active leaf and swing to be confirmed. Preview of your entrance layout, frame finish, glass appearance and hardware. Final dimensions and product details are confirmed with your quote. Glass appearance does not indicate thermal performance or the selected glass type.
A complete commercial entrance Double doors, sidelights and transom · Illustrative preview

Find your profile

Four ways to frame the view.

Choose a slim frame, a wider stile or divided glass with a solid centre rail. Then choose the opening, finish and glazing.

01 Explore this profile

Narrow stile

Aluminum

Slim profiles. Generous glass.

A slender frame for storefront entrances and bright commercial interiors.

02 Explore this profile

Medium stile

Aluminum

A balanced commercial entrance.

More frame presence around a generous glazed opening, with hardware reviewed for the chosen system.

03 Explore this profile

Wide stile

Aluminum

A substantial frame profile.

A broader aluminum profile for a strong architectural outline and project-specific hardware requirements.

04 Explore this profile

Mid-rail

Aluminum

Divided glass. Solid centre rail.

A full-width centre rail divides the glazing and gives the entrance a defined horizontal line.

Interactive design previews. Explore your choices, then let us confirm the dimensions, products and installation scope at your property.

Supply, installation & service

A new door.
Or a better existing one.

From a complete storefront to a door that drags, slams or no longer suits the space, we assess the opening and handle the work.

Request a door assessment
01

New door systems

Single doors or pairs, sidelights and transoms, with glazing and thermal options suited to the building.

02

Hardware & access upgrades

Modern pulls, exit bars, closers and automatic opening. We check what can be fitted to your existing frame and door.

03

Modification & repair

Flooring clearance, alignment, hinges, pivots, locks, seals and glass. Keep a serviceable door working properly.

Try the glass on a door

See the whole door.
Choose your glass.

Each example opens the live configurator with that glass already selected on the door, sidelight and transom. Change the frame, handles or layout from there.

Clear

Subtle natural green cast with a clear view.

Low-iron

A clearer, more neutral appearance with less green cast.

Light grey

A subtle, warm grey appearance.

Grey

A deeper, cooler grey appearance.

Bronze

A warm bronze appearance.

Satin / frosted

A translucent matte finish that softens views.

Tempered safety glass

Heat-treated safety glazing. Available appearances depend on the door system and glass specification.

Laminated glass

A bonded interlayer helps retain broken glass. We can assess privacy, acoustic and security needs with the complete door system.

Insulating glass

Sealed glazing and a suitable thermally broken frame work together for exterior openings. Tint alone does not establish energy performance.

Glass and finish colours are illustrative. We confirm the final sample, glass construction and compatible door system with your quote.

Handles & exit hardware

The details you touch
every day.

Choose the look outside and the way the door works inside. We match mounting, locking and exit requirements to your opening.

Closing & powered opening

A better way
to open and close.

A closer should suit the door, the traffic and the people using it. We replace worn mechanisms and tune the complete opening.

A surface-mounted commercial door closer with an articulated arm.
Surface-mounted closer in an aluminum finish

Surface-mounted closers

A practical replacement or retrofit. We select the correct closer and adjust closing speed, the final latching movement and opening resistance for the door.

See a surface closer

Concealed closers & floor springs

Hide the closing mechanism in the header or floor for a cleaner sightline. We assess the pivots, frame preparation and available space before recommending a retrofit.

See a concealed overhead closer

Automatic swing operators

Powered opening for easier access, with push plates, wave switches or suitable sensors. We coordinate the operator, safety devices and electric locking as one system.

See an automatic operator

Modern access technology

Hands full?
Let the door help.

Bring easier opening and smarter access to a new installation or a compatible existing door. We assess, supply, install and arrange commissioning.

Touchless wave switches with stainless and black faceplates.

Touchless activation

Wave to open.

A wave switch activates a compatible automatic operator. Wired and wireless options can suit new installations and upgrades to existing push plates.

Ask about touchless opening
A narrow-stile wireless deadlatch and mobile or card credential reader.

Mobile & card access

A smarter way in.

Compatible narrow-stile locks can support phone or card credentials and access management. We match the lock, controller and credentials to your building.

Discuss an access upgrade

Equipment depends on the door preparation, exposure and existing access system. Wireless locks may need a compatible hub and controller; weather suitability is checked for exterior doors.

Frames & hardware finishes

Match the building.
Make it yours.

Try a frame finish on a complete door. We confirm anodized or painted options, colour matching and hardware finishes for the chosen system.

Clear anodized Black Dark bronze White

Retrofit, modify & repair

Keep the door.
Improve how it works.

A replacement is not always necessary. We inspect the existing system and explain which repairs or modifications make sense.

01

Door cutting for new flooring

New tile, hardwood or carpet can leave a door catching. We cut down suitable door leaves and adjust bottom rails, sweeps or thresholds where the construction allows.

For aluminum and steel systems, we check the glazing clearance, reinforcement and any fire label before altering the door.

02

Modify an existing door system

Upgrade pulls, locks or exit hardware; add suitable electric locking or powered opening; replace damaged glazing and improve seals or thresholds.

We check the existing preparation, frame condition and wiring, then confirm the work at the site visit.

03

Repair & restore operation

Dragging, sagging, slamming or failing to latch? We service alignment, pivots, hinges, closers, locks, weatherstripping and door-bottom seals.

Broken glass, damaged rails and worn hardware can be assessed together, with installation and finishing in one scope.

Send a photo if you have one. We will confirm a visit and recommend the work.

Arrange a repair or retrofit visit

From selection to installation

A clear next step,
all the way through.

Call (416) 471-5999
  1. 01

    Choose or ask for advice

    Explore a configured door, or tell us what you want to improve. You do not need to know every specification.

  2. 02

    Arrange a site visit

    We measure, assess the existing system and provide a written scope with products, installation and price.

  3. 03

    We supply & install

    Approve the quote, then agree the schedule. We arrange the products, installation, adjustments and finishing.

Commercial entrances across Vaughan, Toronto and the GTA.

Configure your aluminum door

Tell us what you need. We’ll help with the details.

Get in touch

Arrange a door assessment.

Tell us about your door or opening. We will contact you to confirm a site visit.

Your request

Add details (optional)
Attach photos or files (optional)

Photos are automatically resized for sending. Your originals stay unchanged.

Up to 5 files · JPG, PNG, WebP, HEIC/HEIF, PDF or DOCX. Original photos: up to 25 MB each. PDF/DOCX: up to 3.5 MB combined, sent unchanged. Prepared files share 3.5 MB of sending space.

    Your information and private attachments are used to respond to your inquiry. Privacy policy · Project terms

    Prefer to talk?Call (416) 471-5999Text (416) 471-5999