Strataline · Etobicoke, Ontario
Stair Refinishing & White Baluster Railings in Etobicoke
Refinishing and railing replacement can solve different parts of the same staircase. This Etobicoke project coordinated dark treads and landings with white risers, stringers and square balusters.
Featured project · Etobicoke, Ontario
How We Refinished an Etobicoke Staircase and Replaced the Railing
Refinishing the stair surfaces and rebuilding the visible railing system together gave this Etobicoke staircase one coordinated relationship between treads, risers, posts, handrail, balusters, landings and adjacent flooring.
What was there before
Dark stair surfaces sat below an all-wood railing with worn or patchy components. The landing and adjoining wood floor also needed to relate to the finished stair.
What remained
The established stair flight and landing geometry remained. Refinishing the stairs and replacing the railing formed a connected scope.
Work completed
The treads and landings were refinished dark. Risers and stringers were finished white, and replacement square posts, a dark handrail and white square balusters completed the railing.
Planning the work
Post positions, handrail transitions and the upper guard were considered alongside tread and floor colour. The matched room-side views show the same staircase before and after.
The result
White vertical elements separate the dark treads and handrail, giving the whole staircase a consistent finish from the lower flight to the landing.
Choose the scope
Start with what your staircase needs.
See the stair renovation overview, then compare the work that fits your existing wood, railing and floor transitions.
Refinish existing wood
Assess sound wood, remove the old coating and develop a stain beside the surrounding floor.
Fit hardwood tread caps
Review the underlying stair before fitting new hardwood surfaces, nosings and risers.
Plan the railing
Review posts, handrails, balusters and landing guards as one connected installation.
FAQ
Planning stair work in Etobicoke
Were the stairs in this Etobicoke project capped or refinished?
They were refinished. The same flight and landing geometry remain in the matched photographs. Capping is a different scope for suitable stairs that need new hardwood surfaces; the existing tread material and condition determine which approach is appropriate.
Can I replace the railing while keeping the staircase?
This job combined retained stair geometry with a replacement visible railing system. The quote should identify the treads to refinish, the posts and rails to replace, and the landing guard so the connections and finish sequence are clear.
Why include the landing when choosing a stair stain?
The upper landing joins the stair to the existing wood floor. Send photographs from that level and a view looking up from the stair foot; the colour, white boundaries and post-to-floor transition need to work from both directions.
For an initial review, include your city or postal-code area, tread and riser count, landing details and the finish you want. Use the form to describe the project, or text staircase photographs showing the full stair, railing, surrounding floor and damaged areas. Access and assessment scheduling are confirmed for your address.